Maximum battleship
The "maximum battleships," also known as the "Tillman Battleships" were a series of World War I-era design studies for extremely large battleships, prepared in late 1916 and early 1917 to the order of Senator "Pitchfork" Benjamin Tillman. The United States Navy was not interested in the designs at all, and only drew them up to win support from the Senator's Committee on Naval Affairs[?]. They were among the most spectacular battleship designs ever produced.
Senator Tillman had grown impatient with the Navy's requests for larger battleships every year as well as the Navy's habit of building battleships significantly larger than Congress authorized. He accordingly instructed the Navy to design "maximum battleships," the largest battleships that they could use.
The only limits on the potential size of an American battleship were the dimensions of the locks of the Panama Canal. The locks measure roughly 1000 feet by 110 feet, and so the "maximum battleships" were 975 feet (297 meters) long and 108 feet (33 meters) in beam. Harbor depths constrained draft to 32.75 feet (10 meters).
Tillman's first request, in 1912-1913, was never completed, and though the studies it involved had some influence on the design of the Pennsylvania class of battleships,
that class was essentially just an enlargement of the preceeding Nevada class[?]. In 1916, he repeated his request, and this time the Navy's Bureau of Construction and Repair produced a series of design studies, which again had some influence on the design of the next class of battleships, in this case the South Dakotas, an enlargement of the previous Colorado class[?].
After the first four design studies were complete, design IV was chosen for further development and three additional studies, IV-1, IV-2, and IV-3, were prepared. At the request of Secretary of the Navy Josephus Daniels[?], these designs used 18-inch guns instead of the 16-inch/50-calibers used in the earlier studies. The Navy decided that design IV-2 was the most practical (or perhaps the least impractical) and presented it to Congress early in 1917.
These designs differed from the battleships being built in two significant ways beyond just their size. Firstly, unlike preceeding classes, the "maximum battleships" were designed with a continuous flush main deck. Most battleships in this era had a long forecastle deck. Secondly, the Tillman designs all included five casemate guns mounted aft, two on each side and one at the tip of the stern. Similar "stern chasers" had been previously mounted in the Nevada class[?], but were omitted from the Pennsylvania class. These casemates were a return to an older design idea; American battleship designers had abandoned hull-mounted casemates after the New Mexico class[?]. They had transpired to be too "wet" -- heavy seas rendered them unuseable -- and they had been removed from all earlier classes. However, the casemates on the "maximum battleships" would have been higher above the waterline than they had been on earlier designs, so it is possible that their huge size and flush decks would have provided enough freeboard astern to keep the casemates dry.
The Washington Naval Treaty of 1922 limited naval armaments, causing the cancellation of the South Dakota-class battleships and halting all consideration of the "maximum battleships."
Tillman I
Tillman II
Tillman III
Tillman IV
Tillman IV-1
Tillman IV-2
South Dakota class
Iowa class[?]
Montana class
Nimitz class
Design
13 Dec 1916
13 Dec 1916
13 Dec 1916
29 Dec 1916
30 Jan 1917
30 Jan 1917
8 Jul 1918
9 Jun 1938
6 Feb 1940
1960s
Displace-
ment70,000 tons
70,000 tons
63,500 tons
80,000 tons
80,000 tons
80,000 tons
43,200 tons
45,000 tons
70,000 tons
98,500 tons
Length
975 feet
660 feet
860 feet
921 feet
1092 feet
Beam
108 feet
106 feet
108 feet
121 feet
134 feet
Draft
32.75 feet
32.75 feet
36 feet
36 feet
38 feet
Speed
26.5 knots
26.5 knots
30 knots
25.2 knots
25.2 knots
25.2 knots
23.5 knots
33 knots
28 knots
30+ knots
Main
Battery12 16"/50 in four triple turrets
24 16"/50 in four 6-gun turrets
12 16"/50 in four triple turrets
24 16"/50 in four 6-gun turrets
13 18"/50 in five twin and one triple turret
15 18"/50 in five triple turrets
12 16"/50 in four triple turrets
Nine 16"/50 in three triple turrets
12 16"/50 guns in four triple turrets
air wing