Contents

Digital circuit

Digital circuits are electric circuits based on a number of discrete voltage levels. In most cases there are two voltage levels: one near to zero volts and one at a higher level depending on the supply voltage in use. These two levels are often represented as L and H. The two levels are used to represent the binary integers or logic levels of 0 and 1. In active-high logic, L represents binary 0 and H represents binary 1. Active-low logic uses the reverse representation.

It is usual to allow some tolerance in the voltage levels used; for example, 0 to 2 volts might represent logic 0, and 3 to 5 volts logic 1. A voltage of 2 to 3 volts would be invalid and would occur only in a fault condition. However, few logic circuits can detect such a fault, and most will just choose to interpret the signal randomly as either a 0 or a 1.

Digital circuits are the most common hardware realisation of Boolean algebra and are the basis of all digital computers. (See also logic gate.)

They can also be used to process digital information without being connected up as a computer. Such circuits are referred to as "random logic".

It is possible to construct digital circuits in forms other than electronic. In principle, any technology capable of representing two discrete states and performing Boolean operations could be used to build a logic circuit. Hydraulic, pneumatic and mechanical versions of logic gates exist and are used in situations where electricity cannot be used. The first two types are considered under the heading of fluidics. One application of fluidic logic is in military hardware that is likely to be exposed to a nuclear electromagnetic pulse (nuclear EMP, or NEMP) that would destroy any electrical circuits.

Most recently, attempts are being made to construct optical computing[?] systems capable of processing digital information.